Wireless Advanced | TP-Link TL-WR941ND specs

TL-WR941N/TL-WR941ND

Wireless N Router

to access for Filtering Rules.

3.Delete all or disable all entries if there are any entries already.

4.Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE/00-0A-EB-00-07-5F in the MAC Address field, then enter wireless station A/B in the Description field, while select Enabled in the Status pull-down list. Finally, click the Save and the Back button.

The filtering rules that configured should be similar to the following list:

4.6.4 Wireless Advanced

Choose menu “Wireless→Wireless Advanced”, you can configure the advanced settings of your wireless network.

Figure 4-16 Wireless Advanced

¾Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here. The beacons are the packets sent by the router to synchronize a wireless network. Beacon Interval value determines the time interval of the beacons. The default value is 100.

¾RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is larger than the specified RTS Threshold size, the router will send RTS frames to a particular receiving station and negotiate the sending of a data frame. The default value is 2346.

- 33 -

Image 38

TP-Link TL-WR941ND manual Wireless Advanced, To access for Filtering Rules

Contents

TL-WR941N TL-WR941ND Copyright & Trademarks FCC Statement FCC RF Radiation Exposure Statement Country Restriction Reason/remark Contents Dhcp Package Contents Introduction Overview of the Router Main Features Conventions Name Status Indication Panel LayoutFront Panel ¾ Reset button Rear Panel Connecting the Router Connecting the RouterInstallation Environment Requirements System Requirements Hardware Installation of the TL-WR941ND Wireless N Router Quick Installation Guide TCP/IP configuration Success result of Ping command Please check the connection following these steps Quick Installation Guide 3Login the router Choose WAN Connection Type Quick Setup Static IP 10 Quick Setup Finish Status Configuring the RouterLogin Quick Setup Router Status By PBC Quick Secure Setup functionQSS Method One Method Two Add a New Device II. By PIN TL-WR941N/TL-WR941ND TL-WR941N/TL-WR941ND 2 WAN Network1 LAN TL-WR941N/TL-WR941ND TL-WR941N/TL-WR941ND WAN PPPoE PPPoE Advanced Settings Wireless MAC Clone Wireless Settings 12 Wireless Settings Wireless Security TL-WR941N/TL-WR941ND Encryption You can select either Automatic, or Tkip or AES Wireless MAC Filtering 14 Wireless MAC address Filtering 15 Add or Modify Wireless MAC Address Filtering entry Wireless Advanced To access for Filtering Rules Wireless Statistics 17 The router attached wireless stations Dhcp Settings Dhcp Dhcp Clients List 20 Dhcp Clients List To modify or delete an existing entry Address ReservationTo Reserve IP addresses Delete ForwardingVirtual Servers To setup a virtual server entry 25 Add or Modify a Virtual Server Entry Port Triggering 27 Add or Modify a Triggering Entry To assign a computer or server to be a DMZ server 3 DMZUPnP Security Firewall ¾ Enable Firewall the general firewall switch is on or off IP Filtering To add/modify an IP Address filtering entry TL-WR941N/TL-WR941ND Other configurations for the entries Domain Filtering To Add a Domain filtering entry 35 Add or Modify a Domain Filtering entry MAC Filtering To add or modify a Domain Filtering entry Static Routing To add additional entries, repeat steps To add static routing entries 38 Static Routing 40 Dyndns.org Ddns Settings Dynamic DNS System Tools Time SettingTo configure the system manually To configure the system automatically Firmware Factory Defaults Backup & Restore Reboot Password 47 Password System log Remote Management Statistics Statistics Table TCP Appendix a FAQ Figure A-2 PPPoE Connection Mode Figure A-3 MAC Clone Want to use Netmeeting, what do I need to do? Figure A-5 Add or Modify a Virtual server Entry Want to build a WEB Server on the LAN, what should I do? Wireless stations cannot connect to the router Figure A-7 Remote Management TL-WR941N/TL-WR941ND Appendix B Configuring the PCs Install TCP/IP component Shown in the Figure below ¾ Setting IP address manually Figure B-3 Figure B-4 General Appendix C SpecificationsWireless Environmental and Physical Appendix D Glossary TL-WR941N/TL-WR941ND