TL-WR941N/TL-WR941ND

Wireless N Router

applications. If you cannot get the IP Address normally, you can choose this option. (It is rarely required.)

2.If you choose Static IP, you should have the fixed IP Parameters given by your ISP. The Static IP settings page will appear, shown in Figure 4-7.

Figure 4-7WAN - Static IP

¾IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.

¾Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0.

¾Default Gateway - (Optional) Enter the gateway IP address in dotted-decimal notation provided by your ISP.

¾MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP.

¾Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal notation provided by your ISP.

3.If you choose PPPoE, you should enter the following parameters (Figure 4-8):

- 23 -

Page 28
Image 28
TP-Link manual TL-WR941N/TL-WR941ND