TL-WR941N/TL-WR941ND

Wireless N Router

Figure 4-31 Firewall

¾Enable Firewall - the general firewall switch is on or off.

¾Enable IP Address Filtering - set IP Address Filtering is enabled or disabled. There are two default filtering rules of IP Address Filtering, either Allow or Deny passing through the router.

¾Enable Domain Filtering - set Domain Filtering is enabled or disabled.

¾Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can select the default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router.

4.9.2 IP Filtering

Choose menu “SecurityIP Filtering”, you can configure the IP Address filtering rule in the screen (shown in Figure 4-32). The IP Address Filtering feature allows you to control the Internet Access of some specific users based on their IP addresses.

- 44 -

Page 49
Image 49
TP-Link TL-WR941ND manual IP Filtering, ¾ Enable Firewall the general firewall switch is on or off