Factory Defaults, Backup & Restore | TP-Link TL-WR941ND manual

TL-WR941N/TL-WR941ND

Wireless N Router

router experiences no difficulties, it is unnecessary to download a recent firmware version unless the new version has a special feature that you want.

2)When you upgrade the router's firmware, you may lose its current configurations, so please back up the router’s current settings before you upgrade its firmware.

3)Do not turn off the router or press the Reset button while the firmware is being upgraded. Otherwise, the router may be damaged.

4)The router will reboot after the upgrading has been finished.

4.12.3Factory Defaults

Choose menu “System Tools→Factory Defaults”, and you can restore the configurations of the Router to factory defaults on the following screen.

Figure 4-44 Restore Factory Default

Click the Restore button to reset all configuration settings to their default values.

•The default User Name: admin

•The default Password: admin

•The default IP Address: 192.168.1.1

•The default Subnet Mask: 255.255.255.0

)Note:

Any settings you have saved will be lost when the default settings are restored.

4.12.4 Backup & Restore

Choose menu “System Tools→Backup and Restore”, you can save the current configuration of the Router as a backup file and restore the configuration via a backup file(shown in Figure 4-45).

Figure 4-45 Backup & Restore Configuration

- 55 -

Image 60

TP-Link TL-WR941ND manual Factory Defaults, Backup & Restore

Contents

TL-WR941N TL-WR941ND Copyright & Trademarks FCC Statement FCC RF Radiation Exposure Statement Country Restriction Reason/remark Contents Dhcp Package Contents Introduction Overview of the Router Main Features Conventions Panel Layout Front PanelName Status Indication ¾ Reset button Rear Panel Connecting the Router Installation Environment RequirementsConnecting the Router System Requirements Hardware Installation of the TL-WR941ND Wireless N Router Quick Installation Guide TCP/IP configuration Success result of Ping command Please check the connection following these steps Quick Installation Guide 3Login the router Choose WAN Connection Type Quick Setup Static IP 10 Quick Setup Finish Configuring the Router LoginStatus Quick Setup Router Status Quick Secure Setup function QSSBy PBC Method One Method Two Add a New Device II. By PIN TL-WR941N/TL-WR941ND TL-WR941N/TL-WR941ND Network 1 LAN2 WAN TL-WR941N/TL-WR941ND TL-WR941N/TL-WR941ND WAN PPPoE PPPoE Advanced Settings Wireless MAC Clone Wireless Settings 12 Wireless Settings Wireless Security TL-WR941N/TL-WR941ND Encryption You can select either Automatic, or Tkip or AES Wireless MAC Filtering 14 Wireless MAC address Filtering 15 Add or Modify Wireless MAC Address Filtering entry Wireless Advanced To access for Filtering Rules Wireless Statistics 17 The router attached wireless stations Dhcp Settings Dhcp Dhcp Clients List 20 Dhcp Clients List Address Reservation To Reserve IP addressesTo modify or delete an existing entry Forwarding Virtual ServersDelete To setup a virtual server entry 25 Add or Modify a Virtual Server Entry Port Triggering 27 Add or Modify a Triggering Entry 3 DMZ UPnPTo assign a computer or server to be a DMZ server Security Firewall ¾ Enable Firewall the general firewall switch is on or off IP Filtering To add/modify an IP Address filtering entry TL-WR941N/TL-WR941ND Other configurations for the entries Domain Filtering To Add a Domain filtering entry 35 Add or Modify a Domain Filtering entry MAC Filtering To add or modify a Domain Filtering entry Static Routing To add additional entries, repeat steps To add static routing entries 38 Static Routing 40 Dyndns.org Ddns Settings Dynamic DNS Time Setting To configure the system manuallySystem Tools To configure the system automatically Firmware Factory Defaults Backup & Restore Reboot Password 47 Password System log Remote Management Statistics Statistics Table TCP Appendix a FAQ Figure A-2 PPPoE Connection Mode Figure A-3 MAC Clone Want to use Netmeeting, what do I need to do? Figure A-5 Add or Modify a Virtual server Entry Want to build a WEB Server on the LAN, what should I do? Wireless stations cannot connect to the router Figure A-7 Remote Management TL-WR941N/TL-WR941ND Appendix B Configuring the PCs Install TCP/IP component Shown in the Figure below ¾ Setting IP address manually Figure B-3 Figure B-4 Appendix C Specifications WirelessGeneral Environmental and Physical Appendix D Glossary TL-WR941N/TL-WR941ND