Firmware | TP-Link TL-WR941ND guide

TL-WR941N/TL-WR941ND

Wireless N Router

3.Click Save to save the configuration.

To configure the system automatically:

1.Select your local time zone.

2.Enter the IP address for NTP Server Prior.

3.Click the Get GMT button to get system time from Internet if you have connected to the Internet.

)Note:

1.This setting will be used for some time-based functions such as firewall. You must specify your time zone once you login to the router successfully, otherwise, these functions will not take effect.

2.The time will be lost if the router is turned off.

3.The router will obtain GMT automatically from Internet if it has already connected to Internet.

4.12.2 Firmware

Choose menu “System Tools→Firmware”, you can update the latest version of firmware for the Router on the following screen.

Figure 4-43 Firmware Upgrade

¾Firmware Version - This displays the current firmware version.

¾Hardware Version - This displays the current hardware version. The hardware version of the upgrade file must accord with the Router’s current hardware version.

To upgrade the router's firmware, follow these instructions below:

1.Download the latest firmware upgrade file from the TP-LINK website (www.tp-link.com).

2.Type the path and file name of the update file into the “File” field. Or click the Browse button to locate the update file.

3.Click the Upgrade button.

)Note:

1) New firmware versions are posted at www.tp-link.com and can be downloaded for free. If your

- 54 -

Image 59

TP-Link TL-WR941ND manual Firmware, To configure the system automatically

Contents

TL-WR941N TL-WR941ND Copyright & Trademarks FCC Statement Country Restriction Reason/remark FCC RF Radiation Exposure Statement Contents Dhcp Package Contents Overview of the Router Introduction Conventions Main Features Name Status Indication Panel LayoutFront Panel Rear Panel ¾ Reset button System Requirements Connecting the RouterInstallation Environment Requirements Connecting the Router Hardware Installation of the TL-WR941ND Wireless N Router TCP/IP configuration Quick Installation Guide Please check the connection following these steps Success result of Ping command 3Login the router Quick Installation Guide Choose WAN Connection Type Quick Setup Static IP 10 Quick Setup Finish Status Configuring the RouterLogin Router Status Quick Setup Method One Quick Secure Setup functionQSS By PBC Add a New Device Method Two II. By PIN TL-WR941N/TL-WR941ND TL-WR941N/TL-WR941ND 2 WAN Network1 LAN TL-WR941N/TL-WR941ND TL-WR941N/TL-WR941ND WAN PPPoE PPPoE Advanced Settings MAC Clone Wireless 12 Wireless Settings Wireless Settings Wireless Security TL-WR941N/TL-WR941ND Encryption You can select either Automatic, or Tkip or AES 14 Wireless MAC address Filtering Wireless MAC Filtering 15 Add or Modify Wireless MAC Address Filtering entry To access for Filtering Rules Wireless Advanced 17 The router attached wireless stations Wireless Statistics Dhcp Dhcp Settings 20 Dhcp Clients List Dhcp Clients List To modify or delete an existing entry Address ReservationTo Reserve IP addresses Delete ForwardingVirtual Servers 25 Add or Modify a Virtual Server Entry To setup a virtual server entry Port Triggering 27 Add or Modify a Triggering Entry To assign a computer or server to be a DMZ server 3 DMZUPnP Firewall Security IP Filtering ¾ Enable Firewall the general firewall switch is on or off To add/modify an IP Address filtering entry TL-WR941N/TL-WR941ND Domain Filtering Other configurations for the entries 35 Add or Modify a Domain Filtering entry To Add a Domain filtering entry To add or modify a Domain Filtering entry MAC Filtering To add additional entries, repeat steps Static Routing 38 Static Routing To add static routing entries Dynamic DNS 40 Dyndns.org Ddns Settings System Tools Time SettingTo configure the system manually Firmware To configure the system automatically Backup & Restore Factory Defaults Password Reboot System log 47 Password Statistics Remote Management TCP Statistics Table Figure A-2 PPPoE Connection Mode Appendix a FAQ Want to use Netmeeting, what do I need to do? Figure A-3 MAC Clone Want to build a WEB Server on the LAN, what should I do? Figure A-5 Add or Modify a Virtual server Entry Figure A-7 Remote Management Wireless stations cannot connect to the router TL-WR941N/TL-WR941ND Install TCP/IP component Appendix B Configuring the PCs Shown in the Figure below Figure B-3 ¾ Setting IP address manually Figure B-4 Environmental and Physical Appendix C SpecificationsWireless General Appendix D Glossary TL-WR941N/TL-WR941ND