3Com WX3000 Collecting/Clearing Traffic Statistics, Traffic-statistic inbound acl-rule

Configuration example

#Configure a device to adopt SP+SDWRR combination for queue scheduling, assigning queue 3, queue 4, and queue 5 to WRR scheduling group 1, with the weigh of 20, 20 and 30; assigning queue 0, queue 1, and queue 2 to WRR scheduling group 2, with the weight 20, 20, and 40; using SP for scheduling queue 6 and queue 7. Display the configuration information after configuration.

Configuration procedure:

<device> system-view

[device] queue-scheduler wrr group1 3 20 4 20 5 30 group2 0 20 1 20 2 40

[device] display queue-scheduler

QID: scheduling-group weight

-----------------------------------

0	:	wrr , group2	20
1	:	wrr , group2	20
2	:	wrr , group2	40
3	:	wrr , group1	20
4	:	wrr , group1	20
5	:	wrr , group1	30
6	:	sp	0
7	:	sp	0

Collecting/Clearing Traffic Statistics

Refer to Flow-based Traffic Accounting for information about traffic accounting.

Configuration prerequisites

The ACL rules for traffic classification are defined. Refer to the ACL module of this manual for information about defining ACL rules.

Configuration procedure

You can collect traffic statistics or clear traffic statistics on all the packets matching specific ACL rules, or on packets that match specific ACL rules and are of a VLAN, of a port group, or pass a port.

Follow these steps to collect traffic statistics on all the packets matching specific ACL rules:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Collect the statistics on the
packets matching specific ACL	traffic-statistic inbound acl-rule	Required
rules
Clear the statistics on the packets	reset traffic-statistic inbound	Optional
matching specific ACL rules	acl-rule

Follow these steps to collect traffic statistics on packets that are of a VLAN and match specific ACL rules:

To do…	Use the command…	Remarks
Enter system view	system-view	—
	1-27