3Com WX3000 Count times, Datasize size, History-records number, Frequency interval, Timeout time

To do…	Use the command…		Remarks
Configure the number of			Optional
	count times		By default, each test makes
probes per test
			one probe.
			Optional
Configure the packet size	datasize size		By default, the packet size is 56
			bytes.
Configure the maximum		Optional
number of history records that	history-records number	By default, the maximum
can be saved		number is 50.
			Optional
Configure the automatic test	frequency interval		By default, the automatic test
			interval is zero seconds,
interval
			indicating no automatic test will
			be made.
Configure the probe timeout			Optional
	timeout time		By default, a probe times out in
time
			three seconds.
Configure the type of service			Optional
	tos value		By default, the service type is
(ToS)
			zero.
Start the test	test-enable		Required
Display test results	display hwping results		Required
	[ admin-name operation-tag ]		Available in any view.

For ICMP tests, if no IP address is configured for the specified source interface, the ICMP test will fail; if a source IP address has been configured with the source-ipcommand, the source-interfacecommand cannot change the configured IP address.

2)Configuring DHCP test on HWPing client

Follow these steps to configure DHCP test on HWPing client:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enable the HWPing client		Required
	hwping-agent enable	By default, the HWPing client
function
		function is disabled.
Create a HWPing test group	hwping administrator-name	Required
		By default, no test group is
and enter its view	operation-tag
		configured.

1-6