3Com WX3000 operation manual Device tftp 1.1.1.2 get config.cfg config.cfg

Configuration procedure

1)Configure the TFTP server (PC)

Start the TFTP server and configure the working directory on the PC.

2)Configure the TFTP client (switch).

#Log in to the switching engine. (You can log in to the switching engine through the console port or by telnetting the device. See the “Login” module for detailed information.)

If available space on the flash memory of the device is not enough to hold the file to be uploaded, you need to delete files not in use from the flash memory to make room for the file, and then upload the file again. The files in use cannot be deleted.

# Enter system view

<device> system-view

[device]

#Configure the IP address of a VLAN interface on the device to be 1.1.1.1, and ensure that the port through which the device connects with the PC belongs to this VLAN. (This example assumes that the port belongs to VLAN 1.)

[device] interface Vlan-interface 1

[device-Vlan-interface1] ip address 1.1.1.1 255.255.255.0

[device-Vlan-interface1] quit

# Download the device configuration file named config.cfg from the TFTP server to the device.

<device> tftp 1.1.1.2 get config.cfg config.cfg

#After downloading the file, use the startup saved-configurationcommand to specify the downloaded configuration file as the main configuration file for next startup, and restart the device.

<device>startup saved-configuration config.cfg main

Please wait Done!

For information about the startup saved-configurationcommand and how to specify the startup file for the device, refer to System Maintenance and Debugging Operation of this manual and System Maintenance and Debugging Command in the accompanying command manual.

2-4