Severity

Severity value

Description

informational

7

Informational information to be recorded

 

 

 

debugging

8

Information generated during debugging

 

 

 

Information filtering by severity works this way: information with the severity value greater than the configured threshold is not output during the filtering.

z

z

If the threshold is set to 1, only information with the severity being emergencies will be output; If the threshold is set to 8, information of all severities will be output.

Ten channels and six output directions of system information

The system supports six information output directions, including the Console, Monitor terminal (monitor), logbuffer, loghost, trapbuffer and SNMP.

The system supports ten channels. The channels 0 through 5 have their default channel names and are associated with six output directions by default. Both the channel names and the associations between the channels and output directions can be changed through commands.

Table 1-2Information channels and output directions

Information

 

Default channel name

 

 

Default output direction

 

channel number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

console

 

Console (Receives log, trap and debugging

 

 

information)

 

 

 

 

 

 

 

 

 

 

 

1

 

monitor

 

Monitor terminal (Receives log, trap and debugging

 

 

information, facilitating remote maintenance)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Log host (Receives log, trap and debugging

2

 

loghost

 

information and information will be stored in files for

 

 

 

 

 

future retrieval.)

 

 

 

 

 

 

3

 

trapbuffer

 

Trap buffer (Receives trap information, a buffer

 

 

inside the device for recording information.)

 

 

 

 

 

 

 

 

 

 

 

4

logbuffer

 

Log buffer (Receives log information, a buffer

 

inside the device for recording information.)

 

 

 

 

 

 

 

 

5

snmpagent

SNMP NMS (Receives trap information)

 

 

 

 

 

 

6

 

channel6

 

Not specified (Receives log, trap, and debugging

 

 

information)

 

 

 

 

 

 

 

 

 

 

 

7

 

channel7

 

Not specified (Receives log, trap, and debugging

 

 

information)

 

 

 

 

 

 

 

 

 

 

 

8

 

channel8

 

Not specified (Receives log, trap, and debugging

 

 

information)

 

 

 

 

 

 

 

 

 

 

 

9

 

channel9

 

Not specified (Receives log, trap, and debugging

 

 

information)

 

 

 

 

 

 

 

 

 

 

 

 

1-2

Page 566
Image 566
3Com WX3000 operation manual Ten channels and six output directions of system information