3Com WX3000 operation manual Configuring Access Port Attribute, Configuring Hybrid Port Attribute

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enter Ethernet port view	interface interface-type	—
	interface-number
Enable flow control on the		Required
	flow-control	By default, flow control is not
Ethernet port
		enabled on a port.

Configuring Access Port Attribute

Follow these steps to configure access port attribute:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enter Ethernet port view	interface interface-type	—
	interface-number
Configure the link type for the	port link-type access	By default, the link type for the
port as access		port is access.
Add the current access port into	port access vlan vlan-id	Optional
the specified VLAN

Configuring Hybrid Port Attribute

Follow these steps to configure hybrid port attribute:

To do…	Use the command…		Remarks
Enter system view	system-view		—
Enter Ethernet port view	interface interface-type		—
	interface-number
Set the link type for the port as	port link-type hybrid	Required
hybrid
Set the default VLAN ID for the			Optional
	port hybrid pvid vlan vlan-id		By default, the VLAN of a
hybrid port
			hybrid port is VLAN 1.
			Optional
			For a hybrid port, you can
Add the current hybrid port into	port hybrid vlan vlan-id-list		configure to tag the packets of
			specific VLANs, based on
the specified VLAN	{ tagged untagged }
			which the packets of those
			VLANs can be processed in
			differently ways.

Configuring Trunk Port Attribute

Follow these steps to configure trunk port attribute:

1-6