3Com WX3000 Local-user, Password-display-mode, Cipher-force auto, Service-type ftp lan-access

Follow these steps to configure the attributes of a local user

To do…	Use the command…	Remarks
Enter system view	system-view	—
		Optional
	local-user	By default, the password
Set the password display mode		display mode of all access
	password-display-mode	users is auto, indicating the
of all local users
	{ cipher-force auto }	passwords of access users are
		displayed in the modes set by
		the password command.
Add a local user and enter local		Required
	local-user user-name	By default, there is no local
user view		user in the system.
Set a password for the local	password { simple cipher }	Required
user	password
		Optional
Set the status of the local user	state { active block }	By default, the user is in active
		state, that is, the user is
		allowed to request network
		services.
	service-type { ftp lan-access	Required
Authorize the user to access		By default, the system does not
specified type(s) of service	{ telnet ssh terminal }*	authorize the user to access
	[ level level ] }
		any service.
Set the privilege level of the		Optional
	level level	By default, the privilege level of
user
		the user is 0.
		Required
Configure the authorization	authorization vlan string	By default, no authorization
VLAN for the local user		VLAN is configured for the local
		user.
		Optional
	attribute { ip ip-addressmac	When binding the user to a
		remote port, you must use
Set the attributes of the user	mac-address idle-cutsecond	nas-ipip-addressto specify a
	access-limit	remote access server IP
whose service type is	max-user-number vlan vlan-id	address (here, ip-addressis
lan-access	location { nas-ip ip-address	127.0.0.1 by default,
	port port-number port	representing this device).
	port-number } }*	When binding the user to a
		local port, you need not use
		nas-ipip-address.

2-7