1-9
To do… Use the command… Remarks
Configure the destination IP
address destination-ip ip-address
Required
You can configure an IP
address or a host name.
By default, no destination
address is configured.
Configure dns-server dns-server ip-address
Required when you use the
destination-ip command to
configure the destination
address as the host name.
By default, no IP address of the
DNS server is configured.
Configure the source IP
address source-ip ip-address Optional
By default, no source IP
address is configured.
Configure the source port source-port port-number Optional
By default, no source port is
configured.
Configure the test type test-type http Required
By default, the test type is
ICMP.
Configure the number of
probes per test count times Optional
By default, each test makes
one probe.
Configure the maximum
number of history records that
can be saved history-records number Optional
By default, the maximum
number is 50.
Configure the automatic test
interval frequency interval
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Configure the probe timeout
time timeout time Optional
By default, a probe times out in
three seconds.
Configure the type of service tos value Optional
By default, the service type is
zero.
Configure the type of HTTP
operation http-operation { get | post }
Optional
By default, the type of HTTP
operation is get, that is, the
HTTP operation will get data
from the HTTP server.
Start the test test-enable Required
Display test results display hwping results
[ admin-name operation-tag ]
Required
You can execute the command
in any view.