3Com WX3000 operation manual Destination-port, Test-type jitter

5)Configuring jitter test on HWPing client

Follow these steps to configure jitter test on HWPing client:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enable the HWPing client		Required
	hwping-agent enable	By default, the HWPing client
function
		function is disabled.
Create a HWPing test group	hwping administrator-name	Required
		By default, no test group is
and enter its view	operation-tag
		configured.
		Required
		The destination address must
Configure the destination IP		be the IP address of a UDP
	destination-ip ip-address	listening service on the
address
		HWPing server.
		By default, no destination
		address is configured.
		Required
	destination-port	The destination port must be
Configure the destination port		the port of a UDP listening
	Port-number	service on the HWPing server.
		By default, no destination port
		is configured.
Configure the source IP		Optional
	source-ip ip-address	By default, no source IP
address
		address is configured.
		Optional
Configure the source port	source-port port-number	By default, no source port is
		configured.
		Required
Configure the test type	test-type jitter	By default, the test type is
		ICMP.
Configure the number of		Optional
	count times	By default, each test makes
probes per test
		one probe.
Configure the maximum		Optional
number of history records that	history-records number	By default, the maximum
can be saved		number is 50.
		Optional
Configure the packet size	datasize size	By default, the packet size is 68
		bytes.
		Optional
Configure the automatic test	frequency interval	By default, the automatic test
		interval is zero seconds,
interval
		indicating no automatic test will
		be made.

1-10