<device>

#After downloading the file, use the startup saved-configurationcommand to specify the downloaded configuration file as the main configuration file for next startup, and then restart the device.

<device>startup saved-configuration config.cfg main

Please wait

Done!

 

 

For information about the startup saved-configurationcommand and how to specify the startup file for the device, refer to the “System Maintenance and Debugging” module of this manual.

SFTP Configuration

Complete the following tasks to configure SFTP:

 

 

Task

Remarks

 

 

Enabling an SFTP server

Required

 

SFTP Configuration: The Device

 

 

Configuring connection idle time

Optional

 

Operating as an SFTP Server

 

 

 

 

 

Supported SFTP client software

 

 

 

 

 

SFTP Configuration: The Device

Basic configurations on an SFTP client

 

 

 

 

Specifying the source interface or source

 

 

Operating as an SFTP Client

Optional

 

 

IP address for an SFTP client

 

 

 

 

 

 

 

SFTP Configuration: The Device Operating as an SFTP Server

Enabling an SFTP server

Before enabling an SFTP server, you need to enable the SSH server function and specify the service type of the SSH user as SFTP or all. For details, see the SSH server configuration part of SSH Operation Manual of this manual.

Follow these steps to enable an SFTP server:

To do…

Use the command…

Remarks

Enter system view

system-view

 

 

 

Enable an SFTP server

sftp server enable

Required

Disabled by default

 

 

 

 

 

Configuring connection idle time

After the idle time is configured, if the server does not receive service requests from a client within a specified time period, it terminates the connection with the client, thus preventing a user from occupying the connection for a long time without performing any operation.

Follow these steps to configure connection idle time:

1-13

Page 553
Image 553
3Com WX3000 operation manual Sftp Configuration The Device Operating as an Sftp Server, Enabling an Sftp server