3Com WX3000 Gigabitethernet command, Tengigabitethernet, Vlan-interface command, Return, Key end

View	Available		Prompt example	Enter method	Quit method
	operation
			1000 Mbps	Execute the interface
			Ethernet port view:
			[device-GigabitEth	gigabitethernet command in
	Configure			system view.
Ethernet			ernet1/0/1]
	Ethernet port
port view			10 Gigabit
	parameters			Execute the interface
			Ethernet port view:
			[device-TenGigabit	tengigabitethernet
			Ethernet1/1/1]	command in system view.
	Configure			Execute the vlan command
VLAN view	VLAN		[device-vlan1]
				in system view.
	parameters
VLAN	Configure		[device-Vlan-interf	Execute the interface
interface	VLAN interface			Vlan-interface command in
			ace1]
view	parameters			system view.
Loopback	Configure		[device-LoopBack	Execute the interface
	loopback				Execute the
interface				loopback command in
	interface	0]			quit
view				system view.
	parameters				command to
					return to
NULL	Configure
				Execute the interface null	system view.
interface	NULL interface		[device-NULL0]
				command in system view.	Execute the
view	parameters
					return
Local user	Configure local		[device-luser-user	Execute the local-user	command to
	user				return to user
view		1]		command in system view.
	parameters				view.
User	Configure user			Execute the user-interface
interface	interface		[device-ui-aux0]	aux command in system
view	parameters			view.
FTP client	Configure FTP			Execute the ftp command in
	client		[ftp]
view				user view.
	parameters
SFTP	Configure			Execute the sftp command
	SFTP client		sftp-client>
client view				in system view.
	parameters
MST	Configure MST		[device-mst-region	Execute the stp
region	region			region-configuration
		]
view	parameters			command in system view.
Cluster	Configure			Execute the cluster
	cluster		[device-cluster]
view				command in system view.
	parameters
	Configure the		[device-rsa-public-	Execute the rsa	Execute the
	RSA public key			peer-public-key command
			key]
	for SSH users			in system view.	peer-public-
Public key
					key end
	Configure the
view			[device-peer-public	Execute the public-key peer	command to
	RSA or DSA				return to
	public key for		-key]	command in system view.	system view.
	SSH users

1-5