3Com WX3000 operation manual Configuring the Login Banner

Figure 4-1Web interface of the access controller engine

3)Set up a Web configuration environment, as shown in Figure 4-2.

Figure 4-2Set up a Web configuration environment

4)Log in to the switching engine through IE. Launch IE on the Web-based network management terminal (your PC) and enter http://192.168.0.101 in the address bar. (Make sure a route is available between the Web-based network management terminal and the switching engine.)

5)When the login authentication interface (as shown in Figure 4-3) appears, enter the user name and the password configured in step 2 and click Login to bring up the main page of the Web-based network management system.

Figure 4-3The login page of the Web-based network management system

Configuring the Login Banner

Configuration Procedure

If a login banner is configured with the header command, when a user logs in through Web, the banner page is displayed before the user login authentication page. The contents of the banner page are the login banner information configured with the header command. Then, by clicking <Continue> on the banner page, the user can enter the user login authentication page, and enter the main page of the Web-based network management system after passing the authentication. If no login banner is

4-3