3Com WX3000 # Set the probe timeout time to 30 seconds, # Configure the source IP address

[device-hwping-administrator-ftp] count 10

# Set the probe timeout time to 30 seconds.

[device-hwping-administrator-ftp] timeout 30

# Configure the source IP address

[device-hwping-administrator-ftp] source-ip 10.1.1.1

# Start the test.

[device-hwping-administrator-ftp] test-enable

# Display test results

[device-hwping-administrator-ftp] display hwping results administrator ftp HWPing entry(admin administrator, tag ftp) test result:

Destination ip address:10.2.2.2
Send operation times: 10	Receive response times: 10
Min/Max/Average Round Trip Time: 3245/15891/12157
Square-Sum of Round Trip Time: 1644458573
Last complete test time: 2000-4-3 4:0:34.6
Extend result:
SD Maximal delay: 0	DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0	Operation timeout number: 0
System busy operation number: 0	Connection fail number: 0
Operation sequence errors: 0	Drop operation number: 0
Other operation errors: 0

[device-hwping-administrator-ftp] display hwping history administrator ftp HWPing entry(admin administrator, tag ftp) history record:

Index	Response	Status	LastRC	Time
1	15822	1	0	2000-04-03 04:00:34.6
2	15772	1	0	2000-04-03 04:00:18.8
3	9945	1	0	2000-04-03 04:00:02.9
4	15891	1	0	2000-04-03 03:59:52.9
5	15772	1	0	2000-04-03 03:59:37.0
6	15653	1	0	2000-04-03 03:59:21.2
7	9792	1	0	2000-04-03 03:59:05.5
8	9794	1	0	2000-04-03	03:58:55.6
9	9891	1	0	2000-04-03	03:58:45.8
10	3245	1	0	2000-04-03	03:58:35.9

For detailed output description, see the corresponding command manual.

If you are downloading a file from the server, you do not need to specify an FTP operation type. For details, see Configuring FTP test on HWPing client.

1-21