1-6
To do… Use the command… Remarks
Configure a shell banner header shell text
Use either command or both.
By default, no banner is
configured.
For details about the header command, refer to the Login part of the manual.

Displaying FTP server information

To do… Use the command… Remarks
Display the information about FTP server
configurations on the device display ftp-server
Display the source IP address set for an
FTP server display ftp-server source-ip
Display the login FTP client on an FTP
server display ftp-user
Available in any view
FTP Configuration: The Device Operating as an FTP Client

Basic configurations on an FTP client

By default the device can operate as an FTP client In this case you can connect the device to the FTP
server to perform FTP-related operations (such as creating/removing a directory) by executing
commands on the device.
Follow these steps to perform basic configurations on an FTP client:
To do… Use the command… Remarks
Enter FTP client view ftp [ cluster | remote-server
[ port-number ] ] —
Specify to transfer files in ASCII
characters ascii
Specify to transfer files in
binary streams binary
Use either command
By default, files are transferred
in ASCII characters.
Set the data transfer mode to
passive passive Optional
passive by default.