3Com WX3000 operation manual 2Remote loading using FTP server

Figure 1-2Remote loading using FTP server

SwitchPC

Ethernet port Internet

FTP Server	FTP Serve
192 .168 .0.51	10 .1 .1.1

Step 1: As shown in Figure 1-2, connect Switch through an Ethernet port to the PC (whose IP address is 10.1.1.1)

Step 2: Configure the IP address of VLAN-interface 1 on Switch to 192.168.0.51, and subnet mask to 255.255.255.0.

You can configure the IP address for any VLAN on Switch for FTP transmission. However, before configuring the IP address for a VLAN interface, you have to make sure whether the IP addresses of this VLAN and PC are routable.

<device> oap connect slot 0 Connected to OAP! <device_LSW> system-view

deviceView: return to User View with Ctrl+Z. [device_LSW]interface Vlan-interface 1 [device_LSW-Vlan-interface1]ip add 192.168.0.51 255.255.255.0

Step 3: Enable FTP service on Switch, and configure the FTP user name to test and password to pass.

[device_LSW-Vlan-interface1]quit [device_LSW]ftp server enable [device_LSW]local-user test New local user added.

[device_LSW-luser-test]password simple pass [device_LSW-luser-test]service-type ftp

Step 4: Enable FTP client software on the PC. The following takes the command line interface in Windows for illustration.

C:\Documents and Settings\Administrator>

Step 5: Use the cd command on the interface to enter the path that the upgrade file is to be stored. Assume the name of the path is D:\update.

C:\Documents and Settings\Administrator>d:

D:\>cd update

D:\Update>

1-3