3Com WX3000 operation manual Test-type udpprivate, Udppublic

To do…	Use the command…			Remarks
Enter system view	system-view		—
Enable the HWPing client			Required
	hwping-agent enable		By default, the HWPing client
function
			function is disabled.
Create a HWPing test group	hwping administrator-name		Required
			By default, no test group is
and enter its view	operation- tag
			configured.
			Required
			This IP address and the one
Configure the destination			configured on the HWPing
	destination-ip ip-address		server for listening service must
address
			be the same.
			By default, no destination
			address is configured.
			z	Required in	a	Udpprivate
				test
			z	A Udppublic test is a UDP
				connection test on port 7.
				Use the hwping-server
				udpecho ip-address 7
	destination-port			command on the server to
Configure the destination port				configure	the	listening
	port-number			service port;	otherwise the
				test will fail. No port number
				needs to be configured on
				the client; any		destination
				port number configured on
				the client will not take effect.
			z	By default,	no	destination
				port number is configured.
Configure the source IP			Optional
	source-ip ip-address		By default, no source IP
address
			address is configured.
			Optional
Configure the source port	source-port port-number		By default, no source port is
			specified.
	test-type { udpprivate		Required
Configure the test type			By default, the test type is
	udppublic }
			ICMP.
Configure the number of			Optional
	count times		By default, one probe is made
probes per test
			per test.
Configure the maximum		Optional
number of history records that	history-records number	By default, the maximum
can be saved		number is 50.
			Optional
Configure the data packet size	datasize size		By default, the data packet size
			is 100 bytes.

1-14