3Com WX3000 operation manual Test-type dhcp, Source-port port-number, Test-type ftp

To do…		Use the command…		Remarks
			Required
Configure the source		source-interface	You can only configure a VLAN
	interface-type		interface as the source interface.
interface
	interface-number		By default, no source interface is
			configured.
Configure the test type		test-type dhcp	Required
			By default, the test type is ICMP.
Configure the number of			Optional
		count times	By default, each test makes one
probes per test
			probe.
Configure the maximum			Optional
number of history records		history-records number	By default, the maximum number is
that can be saved			50.
Configure the probe timeout			Optional
		timeout time	By default, a probe times out in three
time
			seconds.
Start the test		test-enable	Required
		display hwping results		Required
Display test results				You can execute the command in
		[ admin-name operation-tag ]
				any view.

3)Configuring FTP test on HWPing client

Follow these steps to configure FTP test on HWPing client:

To do…		Use the command…	Remarks
Enter system view		system-view	—
Enable the HWPing client			Required
		hwping-agent enable	By default, the HWPing client
function
			function is disabled.
Create a HWPing test group		hwping administrator-name	Required
			By default, no test group is
and enter its view	operation-tag
			configured.
Configure the destination IP			Required
		destination-ip ip-address	By default, no destination address
address
			is configured.
Configure the source IP			Required
		source-ip ip-address	By default, no source IP address
address
			is configured.
			Optional
Configure the source port		source-port port-number	By default, no source port is
			configured.
Configure the test type		test-type ftp	Required
			By default, the test type is ICMP.

1-7