3Com WX3000 Hwping-server, Tcpconnect ip-address7, Test-type tcpprivate, Tcppublic

To do…		Use the command…		Remarks
				Required in a Tcpprivate test
				A Tcppublic test is a TCP
				connection test on port 7. Use
				the hwping-server
				tcpconnect ip-address7
			command on the server to
Configure the destination port		destination-port	configure the listening service
			port; otherwise the test will fail.
		port-number
			No port number needs to be
			configured on the client; any
			destination port number
			configured on the client will not
			take effect.
			By default, no destination port
			number is configured.
Configure the source IP				Optional
		source-ip ip-address		By default, the source IP
address
				address is not specified.
				Optional
Configure the source port		source-port port-number		By default, no source port is
				specified.
		test-type { tcpprivate	Required
Configure the test type			By default, the test type is
	tcppublic }
			ICMP.
Configure the number of				Optional
		count times		By default, one probe is made
probes per test
				per time.
				Optional
Configure the automatic test		frequency interval		By default, the automatic test
				interval is zero seconds,
interval
				indicating no automatic test will
				be made.
Configure the probe timeout				Optional
		timeout time		By default, a probe times out in
time
				three seconds.
Configure the maximum			Optional
number of history records that		history-records number	By default, the maximum
can be saved			number is 50.
				Optional
Configure the type of service		tos value		By default, the service type is
				zero.
Start the test		test-enable		Required
		display hwping results		Required
Display test results				The display command can be
		[ admin-name operation-tag ]
				executed in any view.

8)Configuring UDP test on HWPing client

Follow these steps to configure UDP test on HWPing client:

1-13