3Com WX3000 Displaying and Maintaining PoE Profile Configuration, PoE Profile to Port

	To do…		Use the command…	Remarks
			apply poe-profile profile-name
	In system view		interface interface-type
			interface-number [ to interface-type
			interface-number ]
Apply the
		Enter
existing PoE			interface interface-type	Use either
		Ethernet
profile to the			interface-number
		port view		approach.
specified	In
Ethernet port		Apply the
	Ethernet
	port view	existing	apply poe-profile profile-name
		PoE
		profile to
		the port

Note the following during the configuration:

1)When the apply poe-profilecommand is used to apply a PoE profile to a port, some PoE features in the PoE profile can be applied successfully while some cannot. PoE profiles are applied to the devices according to the following rules:

zWhen the apply poe-profilecommand is used to apply a PoE profile to a port, the PoE profile is applied successfully only if one PoE feature in the PoE profile is applied properly. When the display current-configurationcommand is used for query, it is displayed that the PoE profile is applied properly to the port.

zIf one or more features in the PoE profile are not applied properly on a port, the device will prompt explicitly which PoE features in the PoE profile are not applied properly on which ports.

zThe display current-configurationcommand can be used to query which PoE profile is applied to a port. However, the command cannot be used to query which PoE features in a PoE profiles are

applied successfully.

2)PoE profile configuration is a global configuration, and applies synchronously in the intelligent resilient framework (IRF) system.

3)Combination of Unit creates a new Fabric. In the newly created Fabric, the PoE profile configuration of the Unit with the smallest Unit ID number will become the PoE profile configuration for the Fabric currently in use.

4)Split of Fabric results in many new Fabrics. In each newly created Fabric, the PoE profile configuration of each Unit remains the same as it was before the split.

Displaying and Maintaining PoE Profile Configuration

To do…	Use the command…	Remarks
Display the detailed information	display poe-profile
about the PoE profiles created	{ all-profile interface	Available in any view
	interface-type interface-number
on the device
	name profile-name }

2-2