3Com WX3000 HWPing Client Configuration, HWPing server configuration, HWPing client configuration

HWPing server configuration

The following table describes the configuration on HWPing server, which is the same for HWPing test types that need to configure HWPing server.

Follow these steps to configure the HWPing server:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enable the HWPing server	hwping-server enable	Required
function		Disabled by default.
		Required for UDP and jitter
Configure a UDP listening	hwping-server udpecho	tests
service	ip-address port-num	By default, no UDP listening
		service is configured.
Configure a TCP listening	hwping-server tcpconnect	Required for TCP tests
		By default, no TCP listening
service	ip-address port-num
		service is configured.

HWPing Client Configuration

HWPing client configuration

After HWPing client is enabled, you can create multiple test groups for different tests, without the need to enable HWPing client repeatedly for each test group.

Different types of HWPing tests are somewhat different in parameters and parameter ranges. The following text describes the configuration on HWPing client for different test types.

1)Configuring ICMP test on HWPing client

Follow these steps to configure ICMP test on HWPing client:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enable the HWPing client		Required
	hwping-agent enable	By default, the HWPing client
function
		function is disabled.
Create a HWPing test group	hwping administrator-name	Required
		By default, no test group is
and enter its view	operation-tag
		configured.
Configure the destination IP		Required
	destination-ip ip-address	By default, no destination
address
		address is configured.
Configure the source IP		Optional
	source-ip ip-address	By default, no source IP
address
		address is configured.
		Optional
Configure the test type	test-type icmp	By default, the test type is
		ICMP.
	1-5