3Com WX3000 operation manual Dns-server, Username and password

Test parameter			Description
		z For DHCP test, you must specify a source interface,
			which will be used by HWPing client to send DHCP
			requests. If no source interface is specified for a DHCP
			test, the test will not succeed.
Source interface (source-interface)		z	After a source interface is specified, HWPing client
			uses this source interface to send DHCP requests
			during a DHCP test.
		z The IP address of the specified source interface will be
			used as the source IP address of DHCP requests.
		For HWPing tests other than DHCP test, you can specify a
Source address (source-ip)		source IP address for test packets, which will be used by
		the server as the destination address of response packets.
	For HWPing tests other than ICMP, DHCP and DNS, you
Source port (source-port)	can specify a source port number for test packets, which
	will be used by the server as the destination port number of
	response packets.
		z You can use HWPing to test a variety of protocols, see
Test type (test-type)			Table 1-1 for details.
		z To perform a type of test, you must first create a test
			group of this type. One test group can be of only one
			HWPing test type.
		z For tests except jitter test, only one test packet is sent
Number of probes per test (count)			in a probe. In a jitter test, you can use the
			jitter-packetnumcommand to set the number of
			packets to be sent in a probe.
		z For ICMP/UDP/jitter test, you can configure the size of
Packet size (datasize)			test packets.
		z	For ICMP test, the ICMP packet size refers to the
			length of ECHO-REQUEST packets (excluding IP and
			ICMP headers)
Maximum number of history records	This parameter is used to specify the maximum number of
	history records that can be saved in a test group. When the
that can be saved (history-records)	number of saved history records exceeds the maximum
	number, HWPing discards some earliest records.
	This parameter is used to set the interval at which the
Automatic test interval (frequency)	HWPing client periodically performs the same test
	automatically.
		z The probe timeout timer is started after the HWPing
Probe timeout time (timeout)			client sends out a test packet.
		z This parameter is in seconds.
Type of service (tos)		Type of service is the value of the ToS field in IP header in
		the test packets.
dns		This parameter is used to specify a DNS domain name in a
		HWPing DNS test group.
dns-server		This parameter is used to set the DNS server IP address in
		a HWPing DNS test group.
HTTP operation type (http-operation)	This parameter is used to set the type of HTTP interaction
	operation between HWPing client and HTTP server.
FTP operation type (ftp-operation)		This parameter is used to set the type of FTP interaction
		operation between HWPing client and FTP server.
FTP login username and password		The two parameters are used to set the username and
(username and password)		password to be used for FTP operation.
			1-3