3Com WX3000 operation manual # Specify the host public key pair name of the server

[device-Vlan-interface1] ip address 10.165.87.137 255.255.255.0

[device-Vlan-interface1] quit

# Generate a DSA key pair

[device] public-key local create dsa

# Export the generated DSA key pair to a file named Switch001.

[device] public-key local export dsa ssh2 Switch001

After generating the key pair, you need to upload the key pair file to the server through FTP or TFTP and complete the server end configuration before you continue to configure the client.

# Disable first-time authentication on the device.

[device] undo ssh client first-time

When first-time authentication is not supported, you must first generate a DSA key pair on the server and save the key pair in a file named Switch002, and then upload the file to the SSH client through FTP or TFTP. For details, refer to the above part “Configure Switch B”.

# Import the public key pair named Switch002 from the file Switch002.

[device] public-key peer Switch002 import sshkey Switch002

# Specify the host public key pair name of the server.

[device] ssh client 10.165.87.136 assign rsa-key Switch002

# Establish the SSH connection to server 10.165.87.136.

[device] ssh2 10.165.87.136 identity-key dsa

Username: client001

Trying 10.165.87.136 ...

Press CTRL+K to abort

Connected to 10.165.87.136 ...

********************************************************************************

* Copyright(c) 2004-2009 3Com Corp. and its licensors. All rights reserved. *

*	Without the owner's prior written consent,	*
*	no decompiling or reverse-engineering shall be allowed.	*

********************************************************************************

<device>

1-35