# Display test results.

[device-hwping-administrator-icmp] display hwping results administrator icmp HWPing entry(admin administrator, tag icmp) test result:

Destination ip

address:10.2.2.2

 

Send operation

times: 10

Receive response times: 10

Min/Max/Average Round Trip Time: 3/6/3

Square-Sum of Round Trip Time: 145

Last succeeded test time: 2000-4-2 20:55:12.3

Extend result:

 

SD Maximal delay: 0

DS Maximal delay: 0

Packet lost in test: 0%

 

Disconnect operation number: 0

Operation timeout number: 0

System busy operation number: 0

Connection fail number: 0

Operation sequence errors: 0

Drop operation number: 0

Other operation errors: 0

 

[device-hwping-administrator-icmp] display hwping history administrator icmp HWPing entry(admin administrator, tag icmp) history record:

Index

Response

Status

LastRC

Time

 

1

3

1

0

2000-04-02 20:55:12.3

2

4

1

0

2000-04-02 20:55:12.3

3

4

1

0

2000-04-02

20:55:12.2

4

3

1

0

2000-04-02

20:55:12.2

5

3

1

0

2000-04-02

20:55:12.2

For detailed output description, see the corresponding command manual.

DHCP Test

Network requirements

As shown in Figure 1-3, Switch A serves as a HWPing client and the DHCP server (Switch B) is an H3C S5600 series Ethernet switch. Perform a HWPing DHCP test between the two devices to test the time required for the HWPing client to obtain an IP address from the DHCP server.

Figure 1-3Network diagram for the DHCP test

Vlan-int 1

IP

network

 

 

 

10.2.2.2/8

 

 

 

 

 

Switch A

 

 

Switch B

HWPing Client

 

 

DHCP Server

Configuration procedure

zConfigure DHCP Server(Switch B):

Configure DHCP server on Switch B. For specific configuration of DHCP server, refer to the DHCP module.

zConfigure HWPing Client (Switch A):

# Enable the HWPing client.

<device> system-view

[device] hwping-agent enable

1-18

Page 629
Image 629
3Com WX3000 operation manual Dhcp Test, # Display test results