3Com WX3000 operation manual Setting to Output System Information to a Monitor Terminal

Setting to Output System Information to a Monitor Terminal

System information can also be output to a monitor terminal, which is a user terminal that has login connections through the AUX, VTY, or TTY user interface.

Setting to output system information to a monitor terminal

Follow these steps to set to output system information to a monitor terminal:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enable the information center	info-center enable	Optional
		Enabled by default.
		Optional
Enable system information	info-center monitor channel	By default, the device outputs
output to Telnet terminal or	{ channel-number	log/debugging/trap information
dumb terminal	channel-name }	to a user terminal through
		information channel 1.
	info-center source	Optional
Configure the output rules of	{ modu-name default }
	channel { channel-number	Refer to Table 1-4 for the
system information	channel-name } [ { log trap	default output rules of system
	debug } { level severity state	information.
	state } ]*
		Optional
Set the format of time stamp in	info-center timestamp { log	By default, the time stamp
		format of the log and trap
	trap debugging } { boot
the output information		output information is date, and
	date none }
		that of the debugging output
		information is boot.

z

z

When there are multiple Telnet users or dumb terminal users, they share some configuration parameters including module filter, language and severity level threshold. In this case, change to any such parameter made by one user will also be reflected on all other user terminals.

To view debugging information of specific modules, you need to set the information type as debug when setting the system information output rules, and enable debugging for corresponding modules through the debugging command.

Enabling system information display on a monitor terminal

After setting to output system information to a monitor terminal, you need to enable the associated display function in order to display the output information on the monitor terminal.

1-10