1-16
To do… Use the command… Remarks
In system
view
dot1x supp-proxy-check
{ logoff | trap } [ interface
interface-list ]
interface interface-type
interface-number
dot1x supp-proxy-check
{ logoff | trap }
Enable proxy
checking for a
port/specified
ports In port view
quit
Required
By default, the 802.1x proxy
checking is disabled on a port.
z The proxy checking function needs the cooperation of an iNode client program.
z The proxy checking function depends on the online user handshaking function. To enable the
proxy detecting function, you need to enable the online user handshaking function first.
z The configuration listed in the table above takes effect only when it is performed on iMC as well as
on the device. In addition, the client version checking function needs to be enabled on the device
too (by using the dot1x version-check command).
Configuring Client Version Checking
Follow these steps to configure client version checking:
To do… Use the command… Remarks
Enter system view system-view —
In system view dot1x version-check [ interface
interface-list ]
interface interface-type
interface-number
dot1x version-check
Enable
iNode client
version
checking In port view
quit
Required
By default, iNode client
version checking is disabled
on a port.
Set the maximum number of
retires to send version
checking request packets
dot1x retry-version-max
max-retry-version-value
Optional
By default, the maximum
number of retires to send
version checking request
packets is 3.
Set the client version checking
period timer dot1x timer ver-period
ver-period-value
Optional
By default, the timer is set to
30 seconds.