3Com WX3000 operation manual Creating an ISP Domain and Configuring Its Attributes

	Task			Remarks
	Creating an ISP Domain and Configuring	Required
	Its Attributes
	Configuring separate AAA schemes	Required
		Required
		z	With	separate	AAA	schemes, you
			can	specify		authentication,
	Configuring an AAA Scheme for an ISP		authorization		and		accounting
AAA			schemes respectively.
	Domain						RADIUS or
configuration		z	You	need to configure
			HWATACACS		before		performing
			RADIUS		or		HWTACACS
			authentication.
	Configuring Dynamic VLAN Assignment	Optional
	Configuring the Attributes of a Local	Optional
	User
	Cutting Down User Connections Forcibly	Optional

Creating an ISP Domain and Configuring Its Attributes

Follow these steps to create an ISP domain and configure its attributes:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Configure the form of the		Optional
delimiter between the user	domain delimiter { at dot }	By default, the delimiter
name and the ISP domain		between the user name and the
name		ISP domain name is “@”.
		Required
Create an ISP domain or set an	domain { isp-name default	If no ISP domain is set as the
ISP domain as the default ISP		default ISP domain, the ISP
	{ disable enable isp-name} }
domain		domain "system" is used as the
		default ISP domain.
		Optional
Set the status of the ISP	state { active block }	By default, an ISP domain is in
		the active state, that is, all the
domain
		users in the domain are allowed
		to request network service.
		Optional
Set the maximum number of	access-limit { disable enable	By default, there is no limit on
access users that the ISP	max-user-number }	the number of access users
domain can accommodate		that the ISP domain can
		accommodate.
	idle-cut { disable enable	Optional
Set the idle-cut function		By default, the idle-cut function
	minute flow }
		is disabled.

2-2