3Com WX3000 operation manual Configure HWPing Client Switch a # Enable the HWPing client

Configuration procedure

zConfigure HWPing Server (Switch B):

# Enable the HWPing server and configure the IP address and port to listen on.

<device> system-view

[device] hwping-server enable

[device] hwping-server tcpconnect 10.2.2.2 8000

zConfigure HWPing Client (Switch A):

# Enable the HWPing client.

<device> system-view

[device] hwping-agent enable

#Create a HWPing test group, setting the administrator name to "administrator" and test tag to "tcpprivate".

[device] Hwping administrator tcpprivate

# Configure the test type as tcpprivate.

[device-hwping-administrator-tcpprivate] test-type tcpprivate

# Configure the IP address of the HWPing server as 10.2.2.2.

[device-hwping-administrator-tcpprivate] destination-ip 10.2.2.2

# Configure the destination port on the HWPing server.

[device-hwping-administrator-tcpprivate] destination-port 8000

# Configure to make 10 probes per test.

[device-hwping-administrator-tcpprivate] count 10

# Set the probe timeout time to 5 seconds.

[device-hwping-administrator-tcpprivate] timeout 5

# Start the test.

[device-hwping-administrator-tcpprivate] test-enable

# Display test results.

[device-hwping-administrator-tcpprivate] display hwping results administrator tcpprivate HWPing entry(admin administrator, tag tcpprivate) test result:

Destination ip	address:10.2.2.2
Send operation	times: 10	Receive response times: 10

Min/Max/Average Round Trip Time: 4/7/5

Square-Sum of Round Trip Time: 282

Last complete test time: 2000-4-2 8:26:2.9

Extend result:
SD Maximal delay: 0	DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0	Operation timeout number: 0
System busy operation number: 0	Connection fail number: 0
Operation sequence errors: 0	Drop operation number: 0
Other operation errors: 0

[device-hwping-administrator-tcpprivate] display hwping history administrator tcpprivate HWPing entry(admin administrator, tag tcpprivate) history record:

1-28