3Com WX3000 # Configure the test type as dns, # Configure the IP address of the DNS server as

Network diagram

Figure 1-10Network diagram for the DNS test

IP network

10.1.1.1/810.2.2.2/8

Switch

DNS Server

HWPing Client

Configuration procedure

zConfigure DNS Server:

Use Windows 2003 Server as the DNS server. For DNS server configuration, refer to the related instruction on Windows 2003 Server configuration.

zConfigure HWPing Client (Switch)

# Enable the HWPing client.

<device> system-view

[device] hwping-agent enable

# Create a HWPing test group, setting the administrator name to "administrator" and test tag to "dns".

[device] hwping administrator dns

# Configure the test type as dns.

[device-hwping-administrator-dns] test-type dns

# Configure the IP address of the DNS server as 10.2.2.2.

[device-hwping-administrator-dns] dns-server 10.2.2.2

# Configure to resolve the domain name www.test.com.

[device-hwping-administrator-dns] dns resolve-target www.test.com

# Configure to make 10 probes per test.

[device-hwping-administrator-dns] count 10

# Set the probe timeout time to 5 seconds.

[device-hwping-administrator-dns] timeout 5

# Start the test.

[device-hwping-administrator-dns] test-enable

# Display test results.

[device-hwping-administrator-dns] display hwping results administrator dns HWPing entry(admin administrator, tag dns) test result:

Destination ip address:10.2.2.2
Send operation times: 10	Receive response times: 10
Min/Max/Average Round Trip Time: 6/10/8
Square-Sum of Round Trip Time: 756
Last complete test time: 2006-11-28 11:50:40.9
Extend result:
SD Maximal delay: 0	DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0	Operation timeout number: 0

1-31