3Com WX3000 Mac-authentication interface, Mac-authentication Quit, Mac-authentication authmode

To do…			Use the command…		Remarks
		In system	mac-authentication interface
Enable MAC		view	interface-list
authentication for			interface interface-type		Use either method
the specified		In interface	interface-number		Disabled by default
port(s) or the
current port		view	mac-authentication
			quit
Set the username		mac-authentication authmode			Optional
					By default, the MAC
in MAC address		usernameasmacaddress [ usernameformat
					address of a user is
mode for MAC	{ with-hyphen without-hyphen } { lowercase
					used as the
authentication		uppercase } fixedpassword password ]
					username.
		Set the
		username in
		fixed mode	mac-authentication authmode
Set the username		for MAC	usernamefixed	Optional
		authenticatio		By default, the
in fixed mode for		n
				username is “mac”
MAC
				and no password is
authentication		Configure the	mac-authentication authusername
				configured.
		username	username
		Configure the	mac-authentication authpassword
		password	password
					Required
Specify an ISP					The default ISP
domain for MAC		mac-authentication domain isp-name			domain (default
authentication					domain) is used by
					default.
					Optional
					The default timeout
					values are as
Configure the MAC	mac-authentication timer { offline-detect				follows:
					300 seconds for
authentication		offline-detect-value quiet quiet-value
					offline detect timer;
timers		server-timeoutserver-timeout-value }
					60 seconds for quiet
					timer; and
					100 seconds for
					server timeout timer

zIf MAC authentication is enabled on a port, you cannot configure the maximum number of dynamic MAC address entries for that port (through the mac-addressmax-mac-countcommand), and vice versa.

zIf MAC authentication is enabled on a port, you cannot configure port security (through the port-security enable command) on that port, and vice versa.

zYou can configure MAC authentication on a port before enabling it globally. However, the configuration will not take effect unless MAC authentication is enabled globally.

1-3