3Com WX3000 operation manual Creating a Hwtacacs Scheme, Configuring Tacacs Authentication Servers

	Task	Remarks
	Creating a HWTACACS Scheme	Required
	Configuring TACACS Authentication Servers	Required
	Configuring TACACS Authorization Servers	Required
Configuring the	Configuring TACACS Accounting Servers	Optional
	Configuring Shared Keys for RADIUS
TACACS client		Optional
	Messages
	Configuring the Attributes of Data to be Sent to	Optional
	TACACS Servers
	Configuring the Timers Regarding TACACS	Optional
	Servers
Configuring the	Refer to the configuration of TACACS servers.	—
TACACS server

Creating a HWTACACS Scheme

The HWTACACS protocol configuration is performed on a scheme basis. Therefore, you must create a HWTACACS scheme and enter HWTACACS view before performing other configuration tasks.

Follow these steps to create a HWTACACS scheme:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Create a HWTACACS scheme	hwtacacs scheme	Required
		By default, no HWTACACS
and enter its view	hwtacacs-scheme-name
		scheme exists.

The system supports up to 16 HWTACACS schemes. You can delete a HWTACACS scheme only when it is not referenced.

Configuring TACACS Authentication Servers

Follow these steps to configure TACACS authentication servers:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Create a HWTACACS scheme	hwtacacs scheme	Required
		By default, no HWTACACS
and enter its view	hwtacacs-scheme-name
		scheme exists.

2-20