3Com WX3000 operation manual Basic System Configuration and Debugging

2 Basic System Configuration and Debugging

Basic System Configuration

Follow these steps to perform basic system configuration:

To do…	Use the command…	Remarks
	clock datetime	Required
Set the current date and		Execute this command in user view.
	HH:MM:SS
time of the system	{ YYYY/MM/DD	The default value is 23:55:00 04/01/2000
	MM/DD/YYYY }
		when the system starts up.
	clock timezone	Optional
Set the local time zone	zone-name { add	Execute this command in user view.
	minus } HH:MM:SS	By default, it is the UTC time zone.
		Optional
		Execute this command in user view.
		z When the system reaches the specified
	clock summer-time	start time, it automatically adds the
Set the name and time	zone_name { one-off	specified offset to the current time, so as
range of the summer	repeating } start-time	to toggle the system time to the summer
time	start-date end-time	time.
	end-date offset-time	z When the system reaches the specified
		end time, it automatically subtracts the
		specified offset from the current time, so
		as to toggle the summer time to normal
		system time.
Enter system view from	system-view	—
user view
Set the system name of	sysname sysname	Optional
the device		By default, the name is device.
Return from current		Optional
	quit	If the current view is user view, you will quit
view to lower level view
		the current user interface.
Return from current		Optional
	return	The composite key Ctrl+Z has the same
view to user view
		effect with the return command.

2-1