3Com WX3000 Displaying and Maintaining Gvrp, Configuring Gvrp Port Registration Mode

Table 1-2Relations between the timers

Timer	Lower threshold	Upper threshold
		This upper threshold is less than or equal to
Hold	10 centiseconds	one-half of the timeout time of the Join timer. You
		can change the threshold by changing the
		timeout time of the Join timer.
	This lower threshold is greater
	than or equal to twice the	This upper threshold is less than one-half of the
Join	timeout time of the Hold timer.	timeout time of the Leave timer. You can change
	You can change the threshold	the threshold by changing the timeout time of the
	by changing the timeout time of	Leave timer.
	the Hold timer.
	This lower threshold is greater	This upper threshold is less than the timeout time
	than twice the timeout time of
Leave		of the LeaveAll timer. You can change the
	the Join timer. You can change
		threshold by changing the timeout time of the
	the threshold by changing the
		LeaveAll timer.
	timeout time of the Join timer.
	This lower threshold is greater
LeaveAll	than the timeout time of the
	Leave timer. You can change	32,765 centiseconds
	threshold by changing the
	timeout time of the Leave timer.

Configuring GVRP Port Registration Mode

Follow these steps to configure GVRP port registration mode:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enter Ethernet port view	interface interface-type	—
	interface-number
Configure GVRP port	gvrp registration { fixed	Optional
		By default, GVRP port
registration mode	forbidden normal }
		registration mode is normal.

Displaying and Maintaining GVRP

To do…		Use the command…		Remarks
Display GARP statistics		display garp statistics
	[ interface interface-list ]
Display the settings of the		display garp timer [ interface		You can execute the display
GARP timers		interface-list ]
				command in any view.
Display GVRP statistics		display gvrp statistics
		[ interface interface-list ]
Display the global GVRP status		display gvrp status
Clear GARP statistics		reset garp statistics		You can execute the reset
		[ interface interface-list ]	command in user view
	1-6