3Com WX3000 Test Types Supported by HWPing, HWPing Test Parameters, Test parameter Description

Figure 1-1HWPing illustration

	IP	network
Switch A		Switch B
HWPing Client		HWPing Server

Test Types Supported by HWPing

Table 1-1Test types supported by HWPing

Supported test types			Description
ICMP test
DHCP test
FTP test		For these types of tests, you need to configure HWPing client
HTTP test		and corresponding servers.
DNS test
SNMP test
Jitter test		z These types of tests need the cooperation of HWPing client
	Tcppublic test
TCP test			and HWPing Server.
		z	Do not perform TCP or UDP test on port 1 to 1023
	Tcpprivate test
			(well-known ports). Otherwise your HWPing test may fail or
	Udppublic test		cause the service corresponding to the well-known port (1 to
UDP test			1023) being unavailable.
	Udpprivate test

HWPing Test Parameters

You need to configure corresponding test parameters for each type of HWPing test. HWPing test parameters can be configured on HWPing client only. For the configurations on HWPing client, refer to section.

Table 1-2HWPing test parameters

Test parameter		Description
		For TCP/UDP/jitter test, you must specify a destination IP
Destination address (destination-ip)		address, and the destination address must be the IP
		address of a TCP/UDP/UDP listening service configured
		on the HWPing server.
	For tcpprivate/udpprivate/jitter test, you must specify a
Destination port (destination-port)	destination port number, and the destination port number
	must be the port number of a TCP or UDP listening service
	configured on the HWPing server.

1-2