3Com WX3000 Time Three seconds Optional Configure the service type, Address is specified

To do…	Use the command…	Remarks
		Optional
Configure the automatic test	frequency interval	By default, the automatic test
		interval is zero seconds,
interval
		indicating no automatic test will
		be made.
Configure the probe timeout		Optional
	timeout time	By default, a probe times out in
time
		three seconds.
		Optional
Configure the service type	tos value	By default, the service type is
		zero.
Start the test	test-enable	Required
	display hwping results	Required
Display test results		The display command can be
	[ admin-name operation-tag ]
		executed in any view.

9)Configuring DNS test on HWPing client

Follow these steps to configure DNS test on HWPing client:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enable the HWPing client		Required
	hwping-agent enable	By default, the HWPing client
function
		function is disabled.
Create a HWPing test group	hwping administrator-name	Required
		By default, no test group is
and enter its view	operation- tag
		configured.
Configure the source IP		Optional
	source-ip ip-address	By default, no source IP
address
		address is specified.
		Required
Configure the test type	test-type dns	By default, the test type is
		ICMP.
Configure the number of		Optional
	count times	By default, one probe is made
probes per test
		per test.
Configure the maximum		Optional
number of history records that	history-records number	By default, the maximum
can be saved		number is 50.
		Optional
Configure the automatic test	frequency interval	By default, the automatic test
		interval is zero seconds,
interval
		indicating no automatic test will
		be made.

1-15