3Com WX3000 Jitter-packetnum number, Jitter-interval interval, Test-type snmpquery

To do…	Use the command…	Remarks
Configure the probe timeout		Optional
	timeout time	By default, a probe times out in
time
		three seconds.
		Optional
Configure the type of service	tos value	By default, the service type is
		zero.
Configure the number of test		Optional
packets that will be sent in each	jitter-packetnum number	By default, each jitter probe will
jitter probe		send 10 packets.
Configure the interval to send		Optional
	jitter-interval interval	By default, the interval is 20
test packets in the jitter test
		milliseconds.
Start the test	test-enable	Required
	display hwping results	Required
Display test results		You can execute the command
	[ admin-name operation-tag ]
		in any view.

6)Configuring SNMP test on HWPing client

Follow these steps to configure SNMP test on HWPing client:

To do…	Use the command…	Remarks
Enter system view	system-view	—
Enable the HWPing client		Required
	hwping-agent enable	By default, the HWPing client
function
		function is disabled.
Create a HWPing test group	hwping administrator-name	Required
		By default, no test group is
and enter its view	operation-tag
		configured.
Configure the destination IP		Required
	destination-ip ip-address	By default, no destination
address
		address is configured.
Configure the source IP		Optional
	source-ip ip-address	By default, no source IP
address
		address is configured.
		Optional
Configure the source port	source-port port-number	By default, no source port is
		configured.
		Required
Configure the test type	test-type snmpquery	By default, the test type is
		ICMP.
Configure the number of		Optional
	count times	By default, each test makes
probes per test
		one probe.

1-11