Gigabit Uplink Web Smart Switch
RESET
Press this button for three seconds to reset the software setting back to factory default setting.
LEDs
LED | Status | Indication | |
|
|
| |
Power | On | The Switch is powered on | |
|
| ||
Off | The Switch is powered off or power supply is abnormal | ||
| |||
|
|
| |
System | On | The Switch works properly | |
|
| ||
Off | The Switch works improperly | ||
| |||
|
|
| |
| On | A valid link is established on the port | |
|
|
| |
Link/Act | Flashing | Data is being transmitted or received. (SFP port has Link/ | |
Act LED only and must connect to 1000Mbps device.1 | |||
|
| ||
|
|
| |
| Off | No device is connected to the corresponding port | |
|
|
| |
| On | The corresponding port is running at 100Mbps | |
|
|
| |
100Mbps | Off | There is no device linked to the corresponding port or the | |
port is running at 10Mbps | |||
|
| ||
|
|
| |
| On | The corresponding port is running at 1000Mbps | |
1000Mbps |
|
| |
Off | There is no device linked to the corresponding port or the | ||
| port is running at 100Mbps | ||
|
| ||
|
|
|
Port Feature
Model | 10/100Mbps RJ45 Port | 10/100/1000Mbps RJ45 Port | SFP Port |
|
|
|
|
8 | 1 | 1 | |
|
|
|
|
16 | 1 | 1 | |
|
|
|
|
24 | 2 | 2 | |
|
|
|
|
48 | 2 | 2 | |
|
|
|
|
10/100Mbps RJ45 Port
Designed to connect to the device with the bandwidth of 10Mbps or 100Mbps. Each port has a corresponding Link/Act and 100Mbps LED.
10/100/1000Mbps RJ45 Port
Designed to connect to the device with the bandwidth of 10Mbps, 100Mbps or 1000Mbps. It has a corresponding Link/Act and 1000Mbps LED.
SFP Port
Designed to install SFP module. It has a corresponding Link/Act LED.
03 |
| Introduction |
| ||
|
