JVC LVT1348-001C Changing the Picture Tone—VFPVideo, Fine Processor, English, Normal, USER2, Tint

Changing the Picture Tone—VFP (Video

Fine Processor)	Remote
	ONLY

While showing a playback picture on the TV screen, you can select the preset picture tone, or adjust it and store your own likeliness.

To select a preset picture tone

1Activate VFP.

NORMAL

GAMMA0

BRIGHTNESS 0

CONTRAST 0

SATURATION 0

TINT0

SHARPNESS 0

On the TV screen

2Select a preset picture tone.

	NORMAL	CINEMA
	USER2	USER1
NORMAL	Normally select this.
CINEMA	Suitable for a movie source.

USER1/USER2 You can adjust parameters and can store the settings (see the right column).

To adjust the picture tone

1Select “USER1” or “USER2.”

• Follow steps 1 and 2 explained on the left column.

2Select a parameter you want to adjust.

GAMMA	Adjust if the neutral color is bright or
	dark (–3 to +3).
BRIGHTNESS	Adjust if the entire picture is bright or
	dark (–8 to +8).
CONTRAST	Adjust if the far and near positions
	are unnatural (–7 to +7).
SATURATION	Adjust if the picture is whitish or
	blackish (–7 to +7).
TINT	Adjust if the human skin color is
	unnatural (–7 to +7).
SHARPNESS	Adjust if the picture is indistinct
	(–8 to +8).

3Adjust the parameter.

4Repeat steps 2 to 3 to adjust other parameters. To erase the screen, press VFP again.

English

17