JVC CA-FSGD7, LVT1348-001C, SP-FSGD7, 0305MWMMDWBET manual Listening to the Radio

Listening to the Radio

To select the band (FM or AM)

FM AM

To tune in to a station

While FM or AM is selected...

Remote control:		Main unit:
			1 sec.
	1 sec.

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.

•When you repeatedly press the button, the frequency changes step by step.

To stop searching manually, press either button.

To preset the stations	Remote
	ONLY

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.

•You can also store the monaural reception mode for FM preset stations if selected.

2Activate the preset number entry mode.

•Finish the following process while the indication on the display is flashing (5 seconds).

3Select a preset number for the station you store.

Examples:

To select preset number 5, press 5.

To select preset number 15, press +10, then 5. To select preset number 30, press +10, +10, then 10.

English

If the received FM station is hard to listen

Remote

ONLY

The MONO indicator lights on the display. Reception will improve though stereo effect is lost—Monaural reception mode.

To restore the stereo effect, press the button again (the MONO indicator goes off).

4Store the station.

To tune in to a preset station	Remote
	ONLY

1Select a band (FM or AM).

FM AM

2Select a preset number you have stored.

•You can also use the 1/¡ buttons to select a preset station.

11