Public Address (PA)

Each unit has a PA output for connection to a

 

public address system. The PA output for a

 

TalkSwitch unit is only accessible from extensions

 

connected to that unit. To connect all outputs to a

 

single amplifier, you will require an adapter.

2.2 SYSTEM INFORMATION

Some of the configuration screens that follow may vary depending on whether the unit is networked or not. In most cases, the 48-CA/CVA screen is shown unless the caption indicates a 24-CA screen. The 24-CA models do not have IP Configuration and VoIP Configuration in the System Information folder.

2.2.1 Administration

For security reasons, we recommend that you use password protection at the administrator level. The password is entered at configuration start-up and when you access the configuration through an extension phone.

To activate the use of a system password:

1.Click the next to System Information -> Administration.

Figure 33: Username and password

2.If you have units in different locations, we recommend that you assign a system name to each unit for tracking purposes. Enter a name in the System Name field. The system name will also be required when you are logging in through the web interface of the unit for status or Call Detail Record (CDR) information. For more information, see

Chapter 4: Call Detail Record (CDR) Logging on page 147.

T A L K S W I T C H C O N F I G U R A T I O N

3 5

Page 47
Image 47
Talkswitch 48-CA/CVA, 24-CA Click the next to System Information Administration, Call Detail Record CDR Logging on