Figure 102: Activating call bridge

How to use call bridge:

1.Call into the system from any out-of-office telephone.

2.At the auto attendant message, dial a hunt group you are authorized to use (9 is default).

3. Enter the password and press # to access a TalkSwitch telephone line. Each TalkSwitch unit has four password activated call bridge accounts.

4.At this point, you can dial a number the same way as from the office. Each account can be configured to allow access to certain hunt groups when using call bridge.

Figure 103: Hunt group access

To activate an account, check the Activate Call Bridge box and enter a 4- to 8-digit password. Click the Hunt Group Access button and assign the hunt groups for this account.

Line hunt group 80 is used for Same Line Connect. To enable line hunt group 80, click the checkbox next to Allow the use of Same Line Connect [by dialing 80].

1 0 4

T A L K S W I T C H US E R G U I D E • N O R T H A M E R I C A

Page 116
Image 116
Talkswitch 24-CA, 48-CA/CVA manual Activating call bridge