Talkswitch 24-CA, 48-CA/CVA manual Keep track of the lines and extensions, Unit ID

Figure 25: Examples of three-digit identifiers

	Unit ID 1	Unit ID 2	Unit ID 3	Unit ID 4
Local analog	111–118	121–128	131–138	141–148
or IP
extensions
Remote	210-219	220-229	230-239	240-249
extensions
Local	111-118	121-128	131-138	141-148
mailboxes
Remote	210-219	220-229	230-239	240-249
mailboxes
General	410-419	420-429	430-439	440-449
mailboxes

1.9.5 Keep track of the lines and extensions

To keep track of the extensions and the lines connected to each unit, label each unit with its unit ID. It simplifies matters when you need to add or remove extensions and lines.

If the units are located in a room away from the extensions and you need to identify the units, the View System Information utility in the configuration software allows you to identify each unit as follows:

1.Open the TalkSwitch configuration software.

2.Click the View System Information link below the TalkSwitch image. See Figure 26.

3.Select the Unit ID to verify.

4.Click the Identify button and observe the flashing LEDs. The lights stop flashing when you click the Close button or when 5 minutes have elapsed.

2 4 T A L K S W I T C H US E R G U I D E • N O R T H A M E R I CA