If you do not want to use fax detection, have the unit perform no action.

If you want automatic fax detection, configure your incoming fax line to route faxes to extension 118. The default configuration assumes that your fax machine is attached to extension 118 (113 for units with four extension jacks).

2.4.2.5 No selection was made at the auto attendant

After the auto attendant has finished playing and no selection was made within a specified number of seconds, the unit can route the call to any extension including a fax machine, play an auto attendant or announcement, go to a voice mailbox, go to the dial-by-name directory, queue to a ring group or simply hang up.

2.4.2.6 Additional features at the auto attendant

The digits 6, 7, 8 and 9 are not available as programmable options. They are used for other system features.

If 6 is dialed

If you press 6 at the auto attendant, you are able to configure and use auto call back and prompted call back features. See 2.5 Call Back/Call Bridge on page 98 for more details about configuring call back and 3.11.2 Using call back on page 145 for details on using call back.

If you dial 6 at the auto attendant and Call Back is not enabled, TalkSwitch answers with the prompt: “I am sorry, there is no matching entry for these digits”.

If 7 is dialed

TalkSwitch uses 7 to precede PBX extensions of another Centrex or PBX system. If TalkSwitch is not connected to another system, 7 is inactive.

If 80–88, or 9 is dialed

If you press 80–88 or 9 at the auto attendant, you can access Call Bridge if it has been enabled. See 2.5 Call Back/Call Bridge on page 98 for more details about configuring call bridge and 3.11.1 Using call bridge on page 144 for details on using call bridge.

8 6

T A L K S W I T C H US E R G U I D E • N O R T H A M E R I C A

Page 98
Image 98
Talkswitch 24-CA No selection was made at the auto attendant, Additional features at the auto attendant, If 6 is dialed