Talkswitch 24-CA, 48-CA/CVA manual For VoIP calls, use this number, Phone Type

If a name was not recorded before you set up the associated voice

mailbox, pick up the handset, press * * + <mailbox number> and press 4.

For VoIP calls, use: [this number]

Select the number you want to display at the remote location when VoIP calls are placed from this extension. If Default VoIP number is selected, the phone number associated with the outgoing VoIP port is used. This selection makes the most sense if your VoIP numbers have been configured to handle all inbound calls the same way.

For <Service Provider> VoIP calls, use:

Figure 56: IP extension username and password

Phone Type

If you have a TalkSwitch phone connected to this extension, select the model of phone. TalkSwitch sets have some integrated features that will not work unless the proper phone is specified. Features include intercom paging, group paging over the speaker, and message waiting counter on the TS-80, TS-200, TS-400 and TS-600 phones.

For the IP extensions, TalkSwitch requires IP phones that have G.711 CODEC support.

The IP phones officially supported by TalkSwitch are:

•Polycom Series — 301, 430, 501, 601 (minor support differences between models)

•Grandstream — GXP-2000 (Excellent low budget phone)

•Counterpath — Eyebeam soft client.

5 6 T A L K S W I T C H US E R G U I D E • N O R T H A M E R I C A