Talkswitch 48-CA/CVA, 24-CA 2.2.6.3 Automatic fax detection

TALKSWITCH CONFIGURATION 53
4. In the Phone numbers section beside Main number, enter the telephone
number that people dial to call your office.
Figure 52: Telephone lines
5. Click the checkbox beside Distinctive Ring 1:
6. Enter the distinctive ring number in the text field. This is the number
people will call to get your fax machine.
7. Click Fax Information.
8. In the Dedicated fax line section, select the fax number from the
drop-down list next to Fax number:
9. In the Fax extension section, select the extension number where your fax
is connected.
10. Save settings to the unit.
2.2.6.3 Automatic fax detection
Provided all calls are answered by the auto attendant, it can detect
incoming fax calls and will route calls to their destination.
If an auto attendant is already configured, do the following:
1. Open the TalkSwitch configuration software if not already open.
2. Select Call Handling -> Auto Attendant.
3. Select Auto Attendant 1. You can configure additional auto attendants
later.