Talkswitch 48-CA/CVA, 24-CA manual Receiving calls at a local extension, Restrictions

Exceptions: For a remote extension intercom call, the phone rings as usual. If a ring group has a different ring pattern, intercom calls follow the cascade settings of the extension dialed. You can enable this feature in the configuration software under Options -> Miscellaneous.

You can perform intercom paging and activate the speakerphone at other local extensions that have TS-80, TS-200, TS-400 or TS-600 phones. To place an intercom call to one of these phones, dial * 84 and the local extension at the TalkSwitch dial tone.

Place out-of-office calls from a local extension

1.Press 9 or 81–88to choose a hunt group at the internal dial tone. This hunt group gives you access to an available line to dial out.

2.If your system requires permissions for outgoing calls, enter your access code.

3.Dial the phone number.

Restrictions

You can set restrictions to specific hunt groups for each extension. Your extension can also be configured to access a line directly. When you pick up a handset, you hear the telephone company dial tone and can dial an outside number as usual.

If you have Direct Line Access enabled for a local extension, you need to dial Flash before dialing local extensions or voice mailboxes.

If you dial your own extension you will be directed to your voicemail. If your voicemail is not set up, you will get a busy signal.

3.2.2 Receiving calls at a local extension

The steps below apply when a regular extension is ringing. If an auto attendant engages before you are able to pick up, the caller can select an option at the auto attendant.

1.Pick up the extension’s handset.

2.If the call went through the auto attendant and call screening is enabled in Call Handling -> Local extension and Extension Ring Groups:

a)	Press	#	to accept the call.
b)	Press	*	to re-route the call to its extension‘s call cascade options.
c)	Hang up.

U S I N G T A L K S W I T C H 1 1 9