Talkswitch 24-CA, 48-CA/CVA manual Examples of leading digits

1.Enter the leading digits you wish to route or block in the Leading Digits field.

2.Select the desired Action (route to a specified line hunt group or block calls) from the corresponding drop-down list.

The entries that you specify for ARS match the dialed digits with the longest leading digits entry. If the numbers dialed match the digits that you specified, the call is routed to a line hunt group or blocked according to the Action you selected.

Entering carrier codes and start times

What is a carrier code?

In addition to leading digits, you can access your long-distance plan. It may be different for North America and for overseas as well as during different times of the day (i.e. business hours or after hours). The Carrier Code 1 and Carrier Code 2 columns give you theses options. TalkSwitch automatically adds a 2-second pause after dialing the carrier code to pick up the dialtone of the long-distance provider. A carrier code can be up to 24 digits long, including ‘*’, comma ‘,’ and ’w’. The comma causes a 2-second pause; ‘w’ waits for the dial tone.

3.Enter the telephone number for your long-distance plan. Enter the number without spaces or dashes.

4.Select Start Time 1 for Carrier Code 1 from the drop-down list. If the access number is the same 24 hours a day, click the checkbox next to All Day. If you have a different plan for business and after hours, enter it in the Carrier Code 2 field and select a time for Start Time 2.

Figure 44: Examples of leading digits

•If you dial 9 followed by a phone number that does not start with 1, 01 or 01161, you access an outside line. The number is automatically routed according to the configuration of line hunt group 9.

4 6 T A L K S W I T C H US E R G U I D E • N O R T H A M E R I C A